User Manual

Common Instrument Functions
R&S
®
FPL1000
206User Manual 1178.3370.02 ─ 03
Current LXI Configuration
Displays the current LXI information from the R&S FPL1000 (read-only).
"Current ver-
sion"
Current LXI version
"LXI Extended
Features"
Detected LXI features, such as HiSlip (see "HiSLIP Protocol"
on page 165)
"Computer
name"
Name of the R&S FPL1000 as defined in the operating system (see
also "Computer Name" on page 200)
"MAC address"
Media Access Control address (MAC address), a unique identifier for
the network card in the R&S FPL1000
"IP address"
IP address of the R&S FPL1000 as defined in the operating system
(see also "IP Address" on page 201).
"ICMP"
Indicates whether the ping responder is active or not
"VXI-11 Dis-
covery"
If enabled, connected devices are detected automatically using the
VXI-11 protocol (see "VXI-11 Protocol" on page 165)
Remote command:
SYSTem:LXI:INFO? on page 833
LXI Password
Password for LAN configuration. The default password is LxiWebIfc.
Remote command:
SYSTem:LXI:PASSword on page 834
LXI Manufacturer Description
Instrument description of the R&S FPL1000
Remote command:
SYSTem:LXI:MDEScription on page 834
LAN Reset
Resets the LAN configuration to its default settings (LCI function).
According to the LXI standard, an LCI must set the following parameters to a default
state.
Parameter Value
TCP/IP Mode DHCP + Auto IP Address
Dynamic DNS Enabled
ICMP Ping Enabled
Password for LAN configuration LxiWebIfc
The LAN settings are configured in the "Network" tab of the "Network + Remote" dialog
box or using the instrument's LXI Browser interface.
Remote command:
SYSTem:LXI:LANReset on page 833
Network and Remote Operation