User Manual

The Spectrum Application (RF Measurements)
R&S
®
FPL1000
313User Manual 1178.3370.02 ─ 03
For details on the filename and location, see "Storage Location and Filename"
on page 103.
Load Standard
Loads the selected measurement settings file.
Remote command:
[SENSe:]ESPectrum<sb>:PRESet[:STANdard] on page 562
Save Standard
Saves the current measurement settings for a specific standard as a file with the
defined name.
Remote command:
[SENSe:]ESPectrum<sb>:PRESet:STORe on page 563
Delete Standard
Deletes the selected standard. Standards predefined by Rohde & Schwarz can also be
deleted. A confirmation query is displayed to avoid unintentional deletion of the stan-
dard.
Note: Restoring predefined standard files. The standards predefined by Rohde &
Schwarz available at the time of delivery can be restored using the "Restore Standard
Files" function (see " Restore Standard Files " on page 313).
Restore Standard Files
Restores the standards predefined by Rohde & Schwarz available at the time of deliv-
ery.
The XML files from the C:\ProgramData\Rohde-Schwarz\ZNL-FPL\sem_backup
folder are copied to the C:\ProgramData\Rohde-Schwarz\ZNL-FPL\sem_std
folder.
Note that this function will overwrite customized standards that have the same name
as predefined standards.
Remote command:
[SENSe:]ESPectrum<sb>:PRESet:RESTore on page 563
List Evaluation (Results Configuration)
Access: "Overview" > "Select Measurement" > "Spectrum Emission Mask" > "List
Evaluation"
In the "List Evaluation" dialog box, you configure the contents and display of the SEM
results.
Measurements and Results