User Manual

The Spectrum Application (RF Measurements)
R&S
®
FPL1000
314User Manual 1178.3370.02 ─ 03
List Evaluation State (Result Summary)..................................................................... 314
Show Peaks ............................................................................................................... 314
Margin ........................................................................................................................ 314
Saving the Result Summary (Evaluation List) to a File .............................................. 314
List Evaluation State (Result Summary)
Activates or deactivates the Result Summary.
Remote command:
CALCulate<n>:ESPectrum:PEAKsearch:AUTO on page 585
TRACe<n>[:DATA] on page 703
Show Peaks
If activated, all peaks that have been detected during an active SEM measurement are
marked with blue squares in the Spectrum diagram.
Remote command:
CALCulate<n>:ESPectrum:PEAKsearch:PSHow on page 586
Margin
Although a margin functionality is not available for the limit check, you can define a
margin (or: threshold) for the peak values to be displayed in the result summary. Only
peaks that exceed the margin value are displayed (also in the diagram, if activated).
Remote command:
CALCulate<n>:ESPectrum:PEAKsearch:MARGin on page 586
Saving the Result Summary (Evaluation List) to a File
Exports the Result Summary of the SEM measurement to an ASCII file for evaluation
in an external application. If necessary, change the decimal separator for evaluation in
other languages.
Define the filename and storage location in the file selection dialog box that is dis-
played when you select the "Save" function.
For details, see "ASCII File Export Format (Spectrum Emission Mask)" on page 326.
Measurements and Results