User Manual

Getting Started

R&S

FPL1000

32User Manual 1178.3370.02 ─ 03

The serial number can be found on the rear panel of the instrument. It is the third part

of the device ID printed on the bar code sticker:

For example, FPL1003-123456

To change the computer name

1. Press the SETUP key and then the "Network + Remote" softkey.

The current "Computer Name" is displayed in the "Network" tab.

2. Enter the new computer name.

3. Close the dialog box.

4.1.5.4 Changing the Windows Firewall Settings

A firewall protects an instrument by preventing unauthorized users from gaining access

to it through a network. Rohde & Schwarz highly recommends the use of the firewall on

your instrument. Rohde & Schwarz instruments are shipped with the Windows firewall

enabled and preconfigured in such a way that all ports and connections for remote

control are enabled.

For more details on firewall configuration, see the following Rohde & Schwarz White

Paper:

●

1EF96: Malware Protection Windows 10

Note that changing firewall settings requires administrator rights.

4.1.6 Configuring the Initial Instrument Settings

This section describes how to set up the R&S FPL1000 initially. For further basic

instrument settings, see the R&S FPL1000 User Manual.

● Setting the User Interface Language...................................................................... 32

● Setting the Date and Time...................................................................................... 33

4.1.6.1 Setting the User Interface Language

The user interface to the R&S FPL1000 is available in several languages.

Changing the user interface language

1. Press the SETUP key.

Preparing for Use