User Manual

The Spectrum Application (RF Measurements)
R&S
®
FPL1000
326User Manual 1178.3370.02 ─ 03
Child node Attribute Value Parameter description Mand.
ReferenceLevel Value <power in dBm> " Ref Level " on page 304 Yes, if the Refer-
enceLevel child
node is used
Unit dBm Defines dBm as unit Yes, if the Refer-
enceLevel node
is used
RFAttenuation Mode Manual | Auto " RF Att Mode "
on page 304
Yes, if the Refer-
enceLevel child
node is used
Preamplifier ON | OFF | 1 | 0 " Preamp " on page 304 Yes
ASCII File Export Format (Spectrum Emission Mask)
When trace data from an SEM measurement is exported, the data is stored in ASCII
format as described below. The first part of the file lists information about the signal
analyzer and the general setup.
File contents Explanation
File header
Type;FPL1003 Model
Version;1.00; Firmware version
Date;31.Mar 17; Storage date of data set
Mode;ANALYZER;SEM; Operating mode and measurement function
Center Freq;13250000000.000000;Hz X-axis settings
Freq Offset;0.000000;Hz
Span;25500000.000000;Hz
x-Axis;LIN;
Start;13237250000.000000;Hz
Stop;13262750000.000000;Hz
Level Offset;0.000000;dB Y-axis settings
Ref Position;100.000000;%
y-Axis;LOG;
Level Range;100.000000;dB
Trace settings
Trace Mode;CLR/WRITE;
Detector;RMS;
Sweep Count;0;
Trace 1:;
x-Unit;Hz;
Measurements and Results