User Manual

The Spectrum Application (RF Measurements)
R&S
®
FPL1000
361User Manual 1178.3370.02 ─ 03
Remote command:
The AM modulation depth can also be queried using the remote command
CALCulate<n>:MARKer<m>:FUNCtion:MDEPth:RESult? on page 619.
7.2.11.3 AM Modulation Depth Configuration
Access: "Overview" > "Select Measurement" > "AM Modulation Depth" > "AM Mod
Depth Config"
The remote commands required to perform these tasks are described in Chap-
ter 8.6.11, "Measuring the AM Modulation Depth", on page 618.
Marker 1 / Marker 2 / Marker 3 ...................................................................................361
Search Signals ...........................................................................................................362
Marker 1 / Marker 2 / Marker 3
Indicates the detected characteristic values as determined by the AM Modulation
Depth measurement:
Measurements and Results