User Manual

The Spectrum Application (RF Measurements)

R&S

FPL1000

403User Manual 1178.3370.02 ─ 03

Frame Count ← Spectrogram Frames

Determines how many frames are plotted during a single sweep (as opposed to a con-

tinuous sweep). The maximum number of possible frames depends on the history

depth (see " History Depth " on page 480).

Remote command:

CALCulate<n>:SPECtrogram:FRAMe:COUNt on page 694

Clear Spectrogram ← Spectrogram Frames

Resets the spectrogram result display and clears the history buffer.

This function is only available if a spectrogram is selected.

Remote command:

CALCulate<n>:SPECtrogram:CLEar[:IMMediate] on page 694

7.6.3 Reference: List of Available RRC and Channel Filters

For power measurement a number of especially steep-edged channel filters are availa-

ble (see the following table). The indicated filter bandwidth is the 3 dB bandwidth.

For RRC filters, the fixed roll-off factor (a) is also indicated.

The available Gaussian 3 dB sweep filters are listed in the R&S FPL1000 data sheet.

Table 7-19: Filter types

Filter Bandwidth Filter Type Application

100 Hz CFILter

200 Hz CFILter

300 Hz CFILter

500 Hz CFILter

1 kHz CFILter

1.5 kHz CFILter

2 kHz CFILter

2.4 kHz CFILter SSB

2.7 kHz CFILter

3 kHz CFILter

3.4 kHz CFILter

4 kHz CFILter DAB, Satellite

4.5 kHz CFILter

5 kHz CFILter

Bandwidth, Filter and Sweep Configuration