User Manual
The Spectrum Application (RF Measurements)
R&S
®
FPL1000
425User Manual 1178.3370.02 ─ 03
7.9.2.1 Individual Marker Setup
Up to 17 markers or delta markers can be activated for each window simultaneously.
Initial marker setup is performed using the "Marker" dialog box.
The markers are distributed among 3 tabs for a better overview. By default, the first
marker is defined as a normal marker, whereas all others are defined as delta markers
with reference to the first marker. All markers are assigned to trace 1, but only the first
marker is active.
Selected Marker .........................................................................................................425
Marker State ...............................................................................................................425
Marker Position X-value .............................................................................................426
Frame (Spectrogram only).......................................................................................... 426
Marker Type ...............................................................................................................426
Reference Marker ...................................................................................................... 426
Linking to Another Marker ..........................................................................................427
Assigning the Marker to a Trace ................................................................................ 427
Select Marker .............................................................................................................427
All Marker Off ............................................................................................................. 428
Selected Marker
Marker name. The marker which is currently selected for editing is highlighted orange.
Remote command:
Marker selected via suffix <m> in remote commands.
Marker State
Activates or deactivates the marker in the diagram.
Marker Usage