User Manual

ManualsBrandsRohde & Schwarz ManualsSignal Generators & Spectrum AnalysersSpectrum Analyser Full Package, 3GHz, 50Ohm

431

432

433

434

435

436

437

438

439

440

The Spectrum Application (RF Measurements)

R&S

FPL1000

436User Manual 1178.3370.02 ─ 03

Use Zoom Limits ← Search Limits

If activated, the peak search is restricted to the active zoom area defined for a single

zoom.

Remote command:

CALCulate<n>:MARKer<m>:X:SLIMits:ZOOM[:STATe] on page 718

Deactivating All Search Limits ← Search Limits

Deactivates the search range limits.

Remote command:

CALCulate<n>:MARKer<m>:X:SLIMits[:STATe] on page 717

CALCulate<n>:THReshold:STATe on page 719

7.9.3.3 Positioning Functions

Access: MKR ->

The following functions set the currently selected marker to the result of a peak search

or set other characteristic values to the current marker value.

Peak Search ...............................................................................................................436

Search Next Peak ...................................................................................................... 436

Search Minimum ........................................................................................................ 437

Search Next Minimum ................................................................................................437

Center Frequency = Marker Frequency ..................................................................... 437

Reference Level = Marker Level ................................................................................ 437

Peak Search

Sets the selected marker/delta marker to the maximum of the trace. If no marker is

active, marker 1 is activated.

For spectrogram displays, define which frame the peak is to be searched in.

Remote command:

CALCulate<n>:MARKer<m>:MAXimum[:PEAK] on page 720

CALCulate<n>:DELTamarker<m>:MAXimum[:PEAK] on page 724

Search Next Peak

Sets the selected marker/delta marker to the next (lower) maximum of the assigned

trace. If no marker is active, marker 1 is activated.

For spectrogram displays, define which frame the next peak is to be searched in.

Remote command:

CALCulate<n>:MARKer<m>:MAXimum:NEXT on page 720

CALCulate<n>:MARKer<m>:MAXimum:RIGHt on page 721

CALCulate<n>:MARKer<m>:MAXimum:LEFT on page 720

CALCulate<n>:DELTamarker<m>:MAXimum:NEXT on page 723

CALCulate<n>:DELTamarker<m>:MAXimum:RIGHt on page 724

CALCulate<n>:DELTamarker<m>:MAXimum:LEFT on page 723

Marker Usage