User Manual

Remote Commands
R&S
®
FPL1000
527User Manual 1178.3370.02 ─ 03
Parameters:
<State> ON | OFF | 1 | 0
ON | 1
The MultiView tab is displayed.
OFF | 0
The most recently displayed channel setup is displayed.
*RST: 0
INSTrument:CREate:DUPLicate
This command duplicates the currently selected channel setup, i.e creates a new chan-
nel setup of the same type and with the identical measurement settings. The name of
the new channel setup is the same as the copied channel setup, extended by a con-
secutive number (e.g. "IQAnalyzer" -> "IQAnalyzer 2").
The channel setup to be duplicated must be selected first using the INST:SEL com-
mand.
Usage:
Event
Manual operation: See " Duplicate Current Channel " on page 85
INSTrument:CREate[:NEW] <ChannelType>, <ChannelName>
This command adds an additional channel setup.
See also
●
INSTrument[:SELect] on page 529
●
INSTrument:CREate:DUPLicate on page 527
Parameters:
<ChannelType> Channel type of the new channel setup.
For a list of available channel setup types see INSTrument:
LIST? on page 528.
<ChannelName> String containing the name of the channel setup. The channel
setup name is displayed as the tab label for the channel setup.
Note: If the specified name for a new channel setup already
exists, the default name, extended by a sequential number, is
used for the new channel setup (see INSTrument:LIST?
on page 528).
Manual operation: See " New Channel Setup " on page 85
INSTrument:CREate:REPLace <ChannelName1>,<ChannelType>,<ChannelName2>
This command replaces a channel setup with another one.
Setting parameters:
<ChannelName1> String containing the name of the channel setup you want to
replace.
Selecting the Operating Mode and Application