User Manual

Remote Commands
R&S
®
FPL1000
542User Manual 1178.3370.02 ─ 03
Parameters:
<TraceNumber> Range: 1 to 6
*RST: 1
Example:
POW:TRAC 2
Assigns the measurement to trace 2.
Manual operation: See " Selected Trace " on page 265
8.6.3 Measuring the Channel Power and ACLR
All remote control commands specific to channel power or ACLR measurements are
described here.
See also Chapter 8.6.2, "Configuring Power Measurements", on page 537.
● Managing Measurement Configurations............................................................... 542
● Configuring the Channels......................................................................................544
● Defining Weighting Filters..................................................................................... 547
● Selecting the Reference Channel......................................................................... 549
● Checking Limits.....................................................................................................550
● Performing an ACLR Measurement......................................................................555
● Analyzing Measurement Results...........................................................................555
● Programming Examples for Channel Power Measurements................................ 557
8.6.3.1 Managing Measurement Configurations
The following commands control measurement configurations for ACLR measure-
ments.
CALCulate<n>:MARKer<m>:FUNCtion:POWer:PRESet.................................................... 542
CALCulate<n>:MARKer<m>:FUNCtion:POWer:STANdard:CATalog?................................. 543
CALCulate<n>:MARKer<m>:FUNCtion:POWer:STANdard:DELete.....................................543
CALCulate<n>:MARKer<m>:FUNCtion:POWer:STANdard:SAVE....................................... 543
CALCulate<n>:MARKer<m>:FUNCtion:POWer:PRESet <Standard>
This command loads a measurement configuration.
The measurement configuration for power measurements consists of weighting filter,
channel bandwidth and spacing, resolution and video bandwidth, detector and sweep
time.
Suffix:
<n>
.
Window
<m> Marker
Configuring and Performing Measurements