User Manual

Remote Commands
R&S
®
FPL1000
544User Manual 1178.3370.02 ─ 03
Parameters:
<Standard> String containing the file name. The file format is xml.
Manual operation: See " User Standards " on page 263
8.6.3.2 Configuring the Channels
The following commands configure channels for channel power and ACLR measure-
ments.
[SENSe:]POWer:ACHannel:ACPairs................................................................................544
[SENSe:]POWer:ACHannel:BWIDth:ACHannel.................................................................544
[SENSe:]POWer:ACHannel:BANDwidth:ACHannel............................................................544
[SENSe:]POWer:ACHannel:BWIDth:ALTernate<ch>......................................................... 544
[SENSe:]POWer:ACHannel:BANDwidth:ALTernate<ch>....................................................544
[SENSe:]POWer:ACHannel:BWIDth[:CHANnel<ch>]......................................................... 545
[SENSe:]POWer:ACHannel:BANDwidth[:CHANnel<ch>]....................................................545
[SENSe:]POWer:ACHannel:NAME:ACHannel...................................................................545
[SENSe:]POWer:ACHannel:NAME:ALTernate<ch>........................................................... 545
[SENSe:]POWer:ACHannel:NAME:CHANnel<ch>.............................................................546
[SENSe:]POWer:ACHannel:SPACing[:ACHannel]............................................................. 546
[SENSe:]POWer:ACHannel:SPACing:ALTernate<ch>....................................................... 546
[SENSe:]POWer:ACHannel:SPACing:CHANnel<ch>.........................................................546
[SENSe:]POWer:ACHannel:TXCHannel:COUNt................................................................547
[SENSe:]POWer:ACHannel:ACPairs <ChannelPairs>
This command defines the number of pairs of adjacent and alternate channels.
Parameters:
<ChannelPairs> Range: 0 to 12
*RST: 1
Manual operation: See " Number of channels: Tx , Adj " on page 264
[SENSe:]POWer:ACHannel:BWIDth:ACHannel <Bandwidth>
[SENSe:]POWer:ACHannel:BANDwidth:ACHannel <Bandwidth>
This command defines the channel bandwidth of the adjacent channels.
Parameters:
<Bandwidth> Range: 100 Hz to 1000 MHz
*RST: 14 kHz
Manual operation: See " Channel Bandwidth " on page 267
[SENSe:]POWer:ACHannel:BWIDth:ALTernate<ch> <Bandwidth>
[SENSe:]POWer:ACHannel:BANDwidth:ALTernate<ch> <Bandwidth>
This command defines the channel bandwidth of the alternate channels.
Configuring and Performing Measurements