User Manual

Remote Commands
R&S
®
FPL1000
549User Manual 1178.3370.02 ─ 03
[SENSe:]POWer:ACHannel:FILTer[:STATe][:ALL] <State>
This command turns the weighting filters for all channels on and off.
Parameters:
<State> ON | OFF | 1 | 0
*RST: 0
[SENSe:]POWer:ACHannel:FILTer[:STATe]:ALTernate<ch> <State>
This command turns the weighting filter for an alternate channel on and off.
Suffix:
<ch>
.
1 to 11
Alternate channel number
Parameters:
<State> ON | OFF | 1 | 0
*RST: 0
Manual operation: See " Weighting Filters " on page 269
[SENSe:]POWer:ACHannel:FILTer[:STATe]:CHANnel<ch> <State>
This command turns the weighting filter for a transmission channel on and off.
Suffix:
<ch>
.
1 to 18
Tx channel number
Parameters:
<State> ON | OFF | 1 | 0
*RST: 0
Manual operation: See " Weighting Filters " on page 269
8.6.3.4 Selecting the Reference Channel
The following commands define the reference channel for relative ACLR measure-
ments.
[SENSe:]POWer:ACHannel:REFerence:AUTO ONCE....................................................... 549
[SENSe:]POWer:ACHannel:REFerence:TXCHannel:AUTO................................................550
[SENSe:]POWer:ACHannel:REFerence:TXCHannel:MANual............................................. 550
[SENSe:]POWer:ACHannel:REFerence:AUTO ONCE
This command sets the channel power as the reference for relative ACLR measure-
ments.
Example:
POW:ACH:REF:AUTO ONCE
Usage: Event
Configuring and Performing Measurements