User Manual

Remote Commands
R&S
®
FPL1000
567User Manual 1178.3370.02 ─ 03
Parameters:
<RBW> Resolution bandwidth.
Refer to the data sheet for available resolution bandwidths.
*RST: 30.0 kHz
Default unit: Hz
Manual operation: See " RBW " on page 303
[SENSe:]ESPectrum<sb>:RANGe<range>:BANDwidth:VIDeo <VBW>
This command defines the video bandwidth for a SEM range.
In case of high speed measurements, the video bandwidth has to be identical for all
ranges.
Suffix:
<sb>
.
1 | 2 | 3
<range> 1...30
Selects the measurement range.
Parameters:
<VBW> Video bandwidth.
Refer to the data sheet for available video bandwidths.
*RST: 10.0 MHz
Default unit: Hz
Manual operation: See " VBW " on page 304
[SENSe:]ESPectrum<sb>:RANGe<range>:COUNt? <Ranges>
This command queries the number of ranges in the sweep list (<range> is irrelevant).
Suffix:
<sb>
.
1 | 2 | 3
Return values:
<Ranges> Number of ranges in the sweep list.
Usage: Query only
[SENSe:]ESPectrum<sb>:RANGe<range>:DELete
This command removes a range from the sweep list.
Note that
●
you cannot delete the reference range
●
a minimum of three ranges is mandatory.
Suffix:
<sb>
.
1 | 2 | 3
Configuring and Performing Measurements