User Manual

Remote Commands
R&S
®
FPL1000
592User Manual 1178.3370.02 ─ 03
Suffix:
<range>
.
1..30
Selects the measurement range.
Parameters:
<RBW> Resolution bandwidth.
Refer to the data sheet for available resolution bandwidths.
Default unit: Hz
Manual operation: See " RBW " on page 333
[SENSe:]LIST:RANGe<range>:BANDwidth:VIDeo <VBW>
This command defines the video bandwidth for a spurious emission measurement
range.
Suffix:
<range>
.
1..30
Selects the measurement range.
Parameters:
<VBW> Video bandwidth.
Refer to the data sheet for available video bandwidths.
Default unit: Hz
Manual operation: See " VBW " on page 333
[SENSe:]LIST:RANGe<range>:COUNt?
This command queries the number of ranges in the sweep list (<range> is irrelevant).
Return values:
<Ranges> Number of ranges in the sweep list.
Usage: Query only
[SENSe:]LIST:RANGe<range>:DELete
This command removes a range from the sweep list.
Note that
●
you cannot delete the reference range
●
a minimum of three ranges is mandatory.
Suffix:
<range>
.
1..30
Selects the measurement range.
Usage: Event
Configuring and Performing Measurements