User Manual

Remote Commands
R&S
®
FPL1000
598User Manual 1178.3370.02 ─ 03
Parameters:
<Transducer> String containing the transducer file name, including the path
information.
Manual operation: See " Transducer " on page 334
8.6.7.3 Configuring the List Evaluation
The following commands configure the list evaluation.
Useful commands for spurious emission measurements described elsewhere
●
MMEMory:STORe<n>:LIST on page 812
Remote commands exclusive to spurious emission measurements
CALCulate<n>:PSEarch:AUTO....................................................................................... 598
CALCulate<n>:PEAKsearch:AUTO..................................................................................598
CALCulate<n>:PSEarch:DETails..................................................................................... 598
CALCulate<n>:ESPectrum:PEAKsearch:DETails.............................................................. 598
CALCulate<n>:PSEarch:MARGin.................................................................................... 599
CALCulate<n>:PEAKsearch:MARGin...............................................................................599
CALCulate<n>:PSEarch:PSHow......................................................................................599
CALCulate<n>:PEAKsearch:PSHow................................................................................599
CALCulate<n>:PSEarch:SUBRanges...............................................................................600
CALCulate<n>:PEAKsearch:SUBRanges.........................................................................600
CALCulate<n>:PSEarch:AUTO <State>
CALCulate<n>:PEAKsearch:AUTO <State>
This command turns the list evaluation on and off.
Suffix:
<n>
.
Window
Parameters:
<State> ON | OFF | 0 | 1
*RST: 1
Example:
CALC:PSE:AUTO OFF
Deactivates the list evaluation.
CALCulate<n>:PSEarch:DETails <State>
CALCulate<n>:ESPectrum:PEAKsearch:DETails <State>
This command configures how detailed the list in the Result Summary is.
Suffix:
<n>
.
Window
Configuring and Performing Measurements