User Manual

Getting Started
R&S
®
FPL1000
63User Manual 1178.3370.02 ─ 03
2
1
4
6
5
3
1 = Channel bar for firmware and measurement settings
2+3 = Window title bar with diagram-specific (trace) information
4 = Diagram area with marker information
5 = Diagram footer with diagram-specific information, depending on measurement application
6 = Instrument status bar with error messages, progress bar and date/time display
Hiding elements in the display
You can hide some of the elements in the display, for example the status bar or chan-
nel bar, to enlarge the display area for the measurement results. ( "Setup" > "Display"
> "Displayed Items" )
For details, see Chapter 6.3.2, "Display Settings", on page 126.
● Channel Setup Bar..................................................................................................63
● Window Title Bar.....................................................................................................66
● Marker Information..................................................................................................67
● Frequency and Span Information in Diagram Footer..............................................68
● Instrument and Status Information..........................................................................68
● Error Information..................................................................................................... 69
4.4.1.1 Channel Setup Bar
Using the R&S FPL1000 you can handle several different measurement tasks (chan-
nels) at the same time (although they can only be performed asynchronously). For
each channel, a separate tab is displayed on the screen. To switch from one channel
display to another, simply select the corresponding tab.
Operating the Instrument