User Manual

Remote Commands
R&S
®
FPL1000
632User Manual 1178.3370.02 ─ 03
TRAC:DATA? TRACE4
//Returns one power and one frequency value per sweep point for each trace.
8.7 Remote Commands for Result Displays
● Working with Windows in the Display................................................................... 632
● Examples: Configuring the Result Display............................................................638
8.7.1 Working with Windows in the Display
The following commands are required to change the evaluation type and rearrange the
screen layout for a channel setup as you do using the SmartGrid in manual operation.
Since the available evaluation types depend on the selected application, some param-
eters for the following commands also depend on the selected channel setup.
Note that the suffix <n> always refers to the window in the currently selected channel
setup (see INSTrument[:SELect] on page 529).
LAYout:ADD[:WINDow]?.................................................................................................632
LAYout:CATalog[:WINDow]?...........................................................................................633
LAYout:IDENtify[:WINDow]?............................................................................................633
LAYout:MOVE[:WINDow]................................................................................................634
LAYout:REMove[:WINDow].............................................................................................634
LAYout:REPLace[:WINDow]............................................................................................635
LAYout:SPLitter............................................................................................................. 635
LAYout:WINDow<n>:ADD?.............................................................................................636
LAYout:WINDow<n>:IDENtify?........................................................................................637
LAYout:WINDow<n>:REMove.........................................................................................637
LAYout:WINDow<n>:REPLace........................................................................................637
LAYout:ADD[:WINDow]? <WindowName>,<Direction>,<WindowType>
This command adds a window to the display in the active channel setup.
This command is always used as a query so that you immediately obtain the name of
the new window as a result.
To replace an existing window, use the LAYout:REPLace[:WINDow] command.
Query parameters:
<WindowName> String containing the name of the existing window the new win-
dow is inserted next to.
By default, the name of a window is the same as its index. To
determine the name and index of all active windows, use the
LAYout:CATalog[:WINDow]? query.
<Direction> LEFT | RIGHt | ABOVe | BELow
Direction the new window is added relative to the existing win-
dow.
Remote Commands for Result Displays