Manualshelf

User Manual

ManualsBrandsRohde & Schwarz ManualsSignal Generators & Spectrum AnalysersSpectrum Analyser Full Package, 3GHz, 50Ohm
651652653654655656657658659660
Remote Commands
R&S
®
FPL1000
657User Manual 1178.3370.02 ─ 03
● Amplitude Settings................................................................................................ 657
● Configuring the Attenuation...................................................................................658
● Configuring a Preamplifier.....................................................................................659
● Scaling the Y-Axis.................................................................................................660
8.8.3.1 Amplitude Settings
The tasks for manual configuration are described in Chapter 7.5.2, "Amplitude Set-
tings", on page 384.
Useful commands for amplitude configuration described elsewhere:
●
[SENSe:]ADJust:LEVel on page 648
Remote commands exclusive to amplitude configuration:
CALCulate<n>:MARKer<m>:FUNCtion:REFerence...........................................................657
CALCulate<n>:UNIT:POWer...........................................................................................657
UNIT<n>:POWer............................................................................................................657
DISPlay[:WINDow<n>]:TRACe<t>:Y[:SCALe]:RLEVel....................................................... 658
DISPlay[:WINDow<n>]:TRACe<t>:Y[:SCALe]:RLEVel:OFFSet........................................... 658
CALCulate<n>:MARKer<m>:FUNCtion:REFerence
This command matches the reference level to the power level of a marker.
If you use the command in combination with a delta marker, that delta marker is turned
into a normal marker.
Suffix:
<n>
.
Window
<m> Marker
Example:
CALC:MARK2:FUNC:REF
Sets the reference level to the level of marker 2.
Usage: Event
Manual operation: See " Reference Level = Marker Level " on page 437
CALCulate<n>:UNIT:POWer <Unit>
UNIT<n>:POWer <Unit>
This command selects the unit of the y-axis.
The unit applies to all power-based measurement windows with absolute values.
Suffix:
<n>
.
irrelevant
Setting Basic Spectrum RF Measurement Parameters