User Manual

ManualsBrandsRohde & Schwarz ManualsSignal Generators & Spectrum AnalysersSpectrum Analyser Full Package, 3GHz, 50Ohm

691

692

693

694

695

696

697

698

699

700

Remote Commands

R&S

FPL1000

693User Manual 1178.3370.02 ─ 03

TRACe<n>:COPY <TraceNumber>, <TraceNumber>

This command copies data from one trace to another.

Suffix:

<n>

Window

Parameters:

<TraceNumber>,

The first parameter is the destination trace, the second parame-

ter is the source.

(Note the 'e' in the parameter is required!)

Example:

TRAC:COPY TRACE1,TRACE2

Copies the data from trace 2 to trace 1.

Manual operation: See " Copy Trace " on page 470

8.8.7.2 Configuring Spectrograms

In addition to the standard "level versus frequency" or "level versus time" spectrum

traces, the R&S FPL1000 also provides a spectrogram display of the measured data. A

spectrogram shows how the spectral density of a signal varies over time. The x-axis

shows the frequency, the y-axis shows the time. The commands required to configure

spectrograms in a remote environment are described here. For details and manual

operation see Chapter 7.10.2.2, "Spectrogram Settings", on page 479.

When configuring spectrograms, the window suffix is irrelevant. The settings are

always applied to the spectrogram window, or to all spectrogram windows, if several

are active for the same channel setup.

For commands to set markers in spectrograms, see Chapter 8.8.8.6, "Marker Search

(Spectrograms)", on page 728.

Configuring a Spectrogram Measurement.................................................................. 693

Configuring the Color Map.......................................................................................... 698

Configuring a Spectrogram Measurement

CALCulate<n>:SGRam:CLEar[:IMMediate].......................................................................694

CALCulate<n>:SPECtrogram:CLEar[:IMMediate].............................................................. 694

CALCulate<n>:SGRam:CONTinuous...............................................................................694

CALCulate<n>:SPECtrogram:CONTinuous...................................................................... 694

CALCulate<n>:SGRam:FRAMe:COUNt........................................................................... 694

CALCulate<n>:SPECtrogram:FRAMe:COUNt...................................................................694

CALCulate<n>:SGRam:FRAMe:SELect........................................................................... 695

CALCulate<n>:SPECtrogram:FRAMe:SELect...................................................................695

CALCulate<n>:SGRam:HDEPth......................................................................................695

CALCulate<n>:SPECtrogram:HDEPth..............................................................................695

CALCulate<n>:SGRam:LAYout....................................................................................... 696

CALCulate<n>:SPECtrogram:LAYout...............................................................................696

Setting Basic Spectrum RF Measurement Parameters