User Manual

Remote Commands
R&S
®
FPL1000
698User Manual 1178.3370.02 ─ 03
Parameters:
<State> ON | OFF | 1 | 0
*RST: 0
Example:
CALC:SGR:TST ON
Activates the time stamp.
Manual operation: See " Time Stamp " on page 480
Configuring the Color Map
DISPlay[:WINDow<n>]:SGRam:COLor:DEFault................................................................698
DISPlay[:WINDow<n>]:SPECtrogram:COLor:DEFault........................................................698
DISPlay[:WINDow<n>]:SGRam:COLor:LOWer................................................................. 698
DISPlay[:WINDow<n>]:SPECtrogram:COLor:LOWer.........................................................698
DISPlay[:WINDow<n>]:SGRam:COLor:SHAPe................................................................. 699
DISPlay[:WINDow<n>]:SPECtrogram:COLor:SHAPe.........................................................699
DISPlay[:WINDow<n>]:SGRam:COLor:UPPer.................................................................. 699
DISPlay[:WINDow<n>]:SPECtrogram:COLor:UPPer..........................................................699
DISPlay[:WINDow<n>]:SGRam:COLor[:STYLe]................................................................699
DISPlay[:WINDow<n>]:SPECtrogram:COLor[:STYLe]........................................................699
DISPlay[:WINDow<n>]:SGRam:COLor:DEFault
DISPlay[:WINDow<n>]:SPECtrogram:COLor:DEFault
This command restores the original color map.
Suffix:
<n>
.
Window
Usage: Event
Manual operation: See " Set to Default " on page 483
DISPlay[:WINDow<n>]:SGRam:COLor:LOWer <Percentage>
DISPlay[:WINDow<n>]:SPECtrogram:COLor:LOWer <Percentage>
This command defines the starting point of the color map.
Suffix:
<n>
.
Window
Parameters:
<Percentage> Statistical frequency percentage.
Range: 0 to 66
*RST: 0
Default unit: %
Example:
DISP:WIND:SGR:COL:LOW 10
Sets the start of the color map to 10%.
Manual operation: See " Start / Stop " on page 482
Setting Basic Spectrum RF Measurement Parameters