User Manual

Remote Commands
R&S
®
FPL1000
701User Manual 1178.3370.02 ─ 03
Example:
CALC:MATH:STAT ON
Turns trace mathematics on.
CALC:MATH:EXPR:DEF (TRACE1-TRACE3)
Subtracts trace 3 from trace 1.
Manual operation: See " Trace Math Function " on page 487
CALCulate<n>:MATH:MODE <Mode>
This command selects the way the R&S FPL1000 calculates trace mathematics.
Suffix:
<n>
.
Window
Parameters:
<Mode> For more information on the way each mode works see Trace
Math Mode.
LINear
Linear calculation.
LOGarithmic
Logarithmic calculation.
POWer
Linear power calculation.
*RST: LOGarithmic
Example:
CALC:MATH:MODE LIN
Selects linear calculation.
Manual operation: See " Trace Math Mode " on page 488
CALCulate<n>:MATH:POSition <Position>
This command defines the position of the trace resulting from the mathematical opera-
tion.
Suffix:
<n>
.
Window
Parameters:
<Position> Vertical position of the trace in % of the height of the diagram
area.
100 PCT corresponds to the upper diagram border.
Range: -100 to 200
*RST: 50
Default unit: PCT
Example:
CALC:MATH:POS 100
Moves the trace to the top of the diagram area.
Manual operation: See " Trace Math Position " on page 488
Setting Basic Spectrum RF Measurement Parameters