User Manual

ManualsBrandsRohde & Schwarz ManualsSignal Generators & Spectrum AnalysersSpectrum Analyser Full Package, 3GHz, 50Ohm

701

702

703

704

705

706

707

708

709

710

Remote Commands

R&S

FPL1000

709User Manual 1178.3370.02 ─ 03

● Signal Count Marker............................................................................................. 754

● Marker Demodulation............................................................................................756

● Programming Examples for Using Markers and Marker Functions.......................758

8.8.8.1 Setting Up Individual Markers

The following commands define the position of markers in the diagram.

CALCulate<n>:DELTamarker<m>:AOFF..........................................................................709

CALCulate<n>:DELTamarker<m>:LINK........................................................................... 709

CALCulate<n>:DELTamarker<m>:LINK:TO:MARKer<m>.................................................. 710

CALCulate<n>:DELTamarker<m>:MODE.........................................................................710

CALCulate<n>:DELTamarker<m>:MREF......................................................................... 711

CALCulate<n>:DELTamarker<m>[:STATe].......................................................................711

CALCulate<n>:DELTamarker<m>:TRACe........................................................................711

CALCulate<n>:DELTamarker<m>:X................................................................................ 712

CALCulate<n>:MARKer<m>:AOFF..................................................................................712

CALCulate<n>:MARKer<m>:LINK:TO:MARKer<m>.......................................................... 712

CALCulate<n>:MARKer<m>[:STATe]...............................................................................713

CALCulate<n>:MARKer<m>:TRACe................................................................................713

CALCulate<n>:MARKer<m>:X........................................................................................ 714

CALCulate<n>:DELTamarker<m>:AOFF

This command turns off all delta markers.

Suffix:

<n>

Window

<m> irrelevant

Example:

CALC:DELT:AOFF

Turns off all delta markers.

Usage: Event

CALCulate<n>:DELTamarker<m>:LINK <State>

This command links delta marker <m> to marker 1.

If you change the horizontal position (x-value) of marker 1, delta marker <m> changes

its horizontal position to the same value.

Tip: to link any marker to a different marker than marker 1, use the CALCulate<n>:

DELTamarker<m>:LINK:TO:MARKer<m> or CALCulate<n>:MARKer<m>:LINK:

TO:MARKer<m> commands.

Suffix:

<n>

Window

<m> Marker

Setting Basic Spectrum RF Measurement Parameters