User Manual

Remote Commands
R&S
®
FPL1000
710User Manual 1178.3370.02 ─ 03
Parameters:
<State> ON | OFF | 1 | 0
*RST: 0
Example:
CALC:DELT2:LINK ON
Manual operation: See " Linking to Another Marker " on page 427
CALCulate<n>:DELTamarker<m>:LINK:TO:MARKer<m> <State>
This command links delta marker <m1> to any active normal marker <m2>.
If you change the horizontal position of marker <m2>, delta marker <m1> changes its
horizontal position to the same value.
Suffix:
<n>
.
Window
<m> Marker
Parameters:
<State> ON | OFF | 1 | 0
*RST: 0
Example:
CALC:DELT4:LINK:TO:MARK2 ON
Links the delta marker 4 to the marker 2.
Manual operation: See " Linking to Another Marker " on page 427
CALCulate<n>:DELTamarker<m>:MODE <Mode>
This command defines whether the position of a delta marker is provided as an abso-
lute value or relative to a reference marker.
Note that when the position of a delta marker is queried, the result is always an abso-
lute value (see CALCulate<n>:DELTamarker<m>:X on page 712)!
Suffix:
<n>
.
Window
<m> irrelevant
Parameters:
<Mode> ABSolute
Delta marker position in absolute terms.
RELative
Delta marker position in relation to a reference marker.
*RST: RELative
Example:
CALC:DELT:MODE ABS
Absolute delta marker position.
Setting Basic Spectrum RF Measurement Parameters