User Manual

Remote Commands
R&S
®
FPL1000
712User Manual 1178.3370.02 ─ 03
Parameters:
<Trace> Trace number the marker is assigned to.
Example:
CALC:DELT2:TRAC 2
Positions delta marker 2 on trace 2.
CALCulate<n>:DELTamarker<m>:X <Position>
This command moves a delta marker to a particular coordinate on the x-axis.
If necessary, the command activates the delta marker and positions a reference
marker to the peak power.
Suffix:
<m>
.
Marker
<n> Window
Parameters:
<Position> Numeric value that defines the marker position on the x-axis.
The position is relative to the reference marker.
To select an absolute position you have to change the delta
marker mode with CALCulate<n>:DELTamarker<m>:MODE
on page 710.
A query returns the absolute position of the delta marker.
Range: The value range and unit depend on the measure-
ment and scale of the x-axis.
Example:
CALC:DELT:X?
Outputs the absolute x-value of delta marker 1.
Manual operation: See " Marker 1 / Marker 2 / Marker 3 / Marker 4 " on page 357
See " Marker 1 / Marker 2 / Marker 3 " on page 361
See "Marker Position X-value " on page 426
CALCulate<n>:MARKer<m>:AOFF
This command turns off all markers.
Suffix:
<n>
.
Window
<m> Marker
Example:
CALC:MARK:AOFF
Switches off all markers.
Usage: Event
Manual operation: See " All Marker Off " on page 428
CALCulate<n>:MARKer<m>:LINK:TO:MARKer<m> <State>
This command links normal marker <m1> to any active normal marker <m2>.
Setting Basic Spectrum RF Measurement Parameters