User Manual

Remote Commands
R&S
®
FPL1000
719User Manual 1178.3370.02 ─ 03
Manual operation: See " Search Threshold " on page 432
CALCulate<n>:THReshold:STATe <State>
This command turns a threshold for the marker peak search on and off (for all markers
in all windows).
Suffix:
<n>
.
irrelevant
Parameters:
<State> ON | OFF | 1 | 0
*RST: 0
Example:
CALC:THR:STAT ON
Switches on the threshold line.
Manual operation: See " Deactivating All Search Limits " on page 285
8.8.8.4 Positioning the Marker
This chapter contains remote commands necessary to position the marker on a trace.
● Positioning Normal Markers .................................................................................719
● Positioning Delta Markers..................................................................................... 723
Positioning Normal Markers
The following commands position markers on the trace.
CALCulate<n>:MARKer<m>:MAXimum:AUTO..................................................................719
CALCulate<n>:MARKer<m>:MAXimum:LEFT...................................................................720
CALCulate<n>:MARKer<m>:MAXimum:NEXT..................................................................720
CALCulate<n>:MARKer<m>:MAXimum[:PEAK]................................................................ 720
CALCulate<n>:MARKer<m>:MAXimum:RIGHt..................................................................721
CALCulate<n>:MARKer<m>:MINimum:AUTO...................................................................721
CALCulate<n>:MARKer<m>:MINimum:LEFT....................................................................721
CALCulate<n>:MARKer<m>:MINimum:NEXT................................................................... 722
CALCulate<n>:MARKer<m>:MINimum[:PEAK]................................................................. 722
CALCulate<n>:MARKer<m>:MINimum:RIGHt...................................................................722
CALCulate<n>:MARKer<m>:MAXimum:AUTO <State>
This command turns an automatic marker peak search for a trace maximum on and
off. The R&S FPL1000 performs the peak search after each sweep.
Suffix:
<n>
.
Window
<m> Marker
Setting Basic Spectrum RF Measurement Parameters