User Manual

Remote Commands
R&S
®
FPL1000
726User Manual 1178.3370.02 ─ 03
You can use the marker values to position the center frequency or reference level
directly using the following commands:
●
CALCulate<n>:MARKer<m>:FUNCtion:CENTer on page 641
●
CALCulate<n>:MARKer<m>:FUNCtion:REFerence on page 657
Useful commands for retrieving results described elsewhere:
●
CALCulate<n>:DELTamarker<m>:X on page 712
●
CALCulate<n>:MARKer<m>:X on page 714
●
CALCulate<n>:MARKer<m>:FUNCtion:FPEaks:COUNt? on page 741
●
CALCulate<n>:MARKer<m>:FUNCtion:FPEaks:X? on page 743
●
CALCulate<n>:MARKer<m>:FUNCtion:FPEaks:Y? on page 743
●
CALCulate<n>:MARKer<m>:FUNCtion:NOISe:RESult? on page 743
●
CALCulate<n>:DELTamarker<m>:FUNCtion:PNOise:RESult?
on page 745
●
CALCulate<n>:DELTamarker<m>:FUNCtion:BPOWer:RESult?
on page 749
●
CALCulate<n>:MARKer<m>:FUNCtion:BPOWer:RESult? on page 748
●
CALCulate<n>:MARKer<m>:FUNCtion:NDBDown:RESult? on page 752
●
CALCulate<n>:MARKer<m>:FUNCtion:NDBDown:FREQuency? on page 751
●
CALCulate<n>:MARKer<m>:FUNCtion:NDBDown:QFACtor? on page 752
●
CALCulate<n>:MARKer<m>:COUNt:FREQuency? on page 755
Remote commands exclusive to retrieving marker results
CALCulate<n>:DELTamarker<m>:X:RELative?.................................................................726
CALCulate<n>:DELTamarker<m>:Y?...............................................................................727
CALCulate<n>:MARKer<m>:Y?.......................................................................................727
CALCulate<n>:DELTamarker<m>:X:RELative?
This command queries the relative position of a delta marker on the x-axis.
If necessary, the command activates the delta marker first.
Suffix:
<n>
.
Window
<m> Marker
Return values:
<Position> Position of the delta marker in relation to the reference marker.
Example:
CALC:DELT3:X:REL?
Outputs the frequency of delta marker 3 relative to marker 1 or
relative to the reference position.
Usage: Query only
Setting Basic Spectrum RF Measurement Parameters