User Manual

Remote Commands
R&S
®
FPL1000
729User Manual 1178.3370.02 ─ 03
Remote commands exclusive to spectrogram markers
CALCulate<n>:MARKer<m>:SGRam:FRAMe................................................................... 729
CALCulate<n>:MARKer<m>:SPECtrogram:FRAMe...........................................................729
CALCulate<n>:MARKer<m>:SGRam:SARea....................................................................730
CALCulate<n>:MARKer<m>:SPECtrogram:SARea........................................................... 730
CALCulate<n>:MARKer<m>:SGRam:XY:MAXimum[:PEAK]...............................................730
CALCulate<n>:MARKer<m>:SPECtrogram:XY:MAXimum[:PEAK]...................................... 730
CALCulate<n>:MARKer<m>:SGRam:XY:MINimum[:PEAK]................................................730
CALCulate<n>:MARKer<m>:SPECtrogram:XY:MINimum[:PEAK]....................................... 730
CALCulate<n>:MARKer<m>:SGRam:Y:MAXimum:ABOVe................................................ 730
CALCulate<n>:MARKer<m>:SPECtrogram:Y:MAXimum:ABOVe........................................730
CALCulate<n>:MARKer<m>:SGRam:Y:MAXimum:BELow.................................................731
CALCulate<n>:MARKer<m>:SPECtrogram:Y:MAXimum:BELow........................................ 731
CALCulate<n>:MARKer<m>:SGRam:Y:MAXimum:NEXT...................................................731
CALCulate<n>:MARKer<m>:SPECtrogram:Y:MAXimum:NEXT.......................................... 731
CALCulate<n>:MARKer<m>:SGRam:Y:MAXimum[:PEAK].................................................731
CALCulate<n>:MARKer<m>:SPECtrogram:Y:MAXimum[:PEAK]........................................ 731
CALCulate<n>:MARKer<m>:SGRam:Y:MINimum:ABOVe................................................. 732
CALCulate<n>:MARKer<m>:SPECtrogram:Y:MINimum:ABOVe.........................................732
CALCulate<n>:MARKer<m>:SGRam:Y:MINimum:BELow..................................................732
CALCulate<n>:MARKer<m>:SPECtrogram:Y:MINimum:BELow..........................................732
CALCulate<n>:MARKer<m>:SGRam:Y:MINimum:NEXT....................................................732
CALCulate<n>:MARKer<m>:SPECtrogram:Y:MINimum:NEXT........................................... 732
CALCulate<n>:MARKer<m>:SGRam:Y:MINimum[:PEAK]..................................................733
CALCulate<n>:MARKer<m>:SPECtrogram:Y:MINimum[:PEAK]......................................... 733
CALCulate<n>:MARKer<m>:SGRam:FRAMe <Frame> | <Time>
CALCulate<n>:MARKer<m>:SPECtrogram:FRAMe <Frame> | <Time>
This command positions a marker on a particular frame.
Suffix:
<n>
.
Window
<m> Marker
Parameters:
<Frame> Selects a frame directly by the frame number. Valid if the time
stamp is off.
The range depends on the history depth.
<Time> Selects a frame via its time stamp. Valid if the time stamp is on.
The number is the (negative) distance to frame 0 in seconds.
The range depends on the history depth.
Example:
CALC:MARK:SGR:FRAM -20
Sets the marker on the 20th frame before the present.
CALC:MARK2:SGR:FRAM -2s
Sets second marker on the frame 2 seconds ago.
Manual operation: See " Frame (Spectrogram only)" on page 426
Setting Basic Spectrum RF Measurement Parameters