User Manual

Remote Commands
R&S
®
FPL1000
750User Manual 1178.3370.02 ─ 03
Return values:
<Power> Signal power over the delta marker bandwidth.
Usage: Query only
CALCulate<n>:DELTamarker<m>:FUNCtion:BPOWer:SPAN <Span>
This command defines the bandwidth around the delta marker position.
Suffix:
<n>
.
Window
<m> Marker
Parameters:
<Span> Frequency. The maximum span depends on the marker position
and R&S FPL1000 model.
*RST: 5% of current span
Default unit: Hz
Manual operation: See " Span " on page 450
CALCulate<n>:DELTamarker<m>:FUNCtion:BPOWer[:STATe] <State>
This command turns delta markers for band power measurements on and off.
If neccessary, the command also turns on a reference marker.
Suffix:
<n>
.
Window
<m> Marker
Parameters:
<State> ON | OFF | 1 | 0
*RST: 0
Manual operation: See " Band Power Measurement State " on page 450
See " Switching All Band Power Measurements Off "
on page 451
8.8.8.12 n dB Down Marker
The following commands control the n dB down markers.
CALCulate<n>:MARKer<m>:FUNCtion:NDBDown............................................................ 751
CALCulate<n>:MARKer<m>:FUNCtion:NDBDown:FREQuency?........................................751
CALCulate<n>:MARKer<m>:FUNCtion:NDBDown:QFACtor?.............................................752
CALCulate<n>:MARKer<m>:FUNCtion:NDBDown:RESult?............................................... 752
CALCulate<n>:MARKer<m>:FUNCtion:NDBDown:STATe................................................. 753
CALCulate<n>:MARKer<m>:FUNCtion:NDBDown:TIME?..................................................753
Setting Basic Spectrum RF Measurement Parameters