User Manual

Remote Commands
R&S
®
FPL1000
757User Manual 1178.3370.02 ─ 03
Example:
CALC:MARK:FUNC:DEM:HOLD 3s
Manual operation: See " Marker Stop Time " on page 452
CALCulate<n>:MARKer<m>:FUNCtion:DEModulation:SELect <DemodMode>
This command selects the demodulation mode at the marker position.
Suffix:
<n>
.
Window
<m> Marker
Parameters:
<DemodMode> AM
AM demodulation
FM
FM demodulation
*RST: AM
Example:
CALC:MARK:FUNC:DEM:SEL FM
Manual operation: See " Modulation " on page 453
CALCulate<n>:MARKer<m>:FUNCtion:DEModulation[:STATe] <State>
This command turns the audio demodulator on and off when the measurement rea-
ches a marker position.
Suffix:
<n>
.
Window
<m> Marker
Parameters:
<State> ON | OFF | 1 | 0
*RST: 0
Example:
CALC:MARK3:FUNC:DEM ON
Switches on the demodulation for marker 3.
Manual operation: See " Marker Demodulation State " on page 452
[SENSe:]DEMod:SQUelch:LEVel <Threshold>
This command defines the threshold for selective demodulation.
All signals below the threshold are not demodulated.
Parameters:
<Threshold> Percentage of the display height.
Range: 0 to 100
*RST: 50
Setting Basic Spectrum RF Measurement Parameters