User Manual

Remote Commands
R&S
®
FPL1000
796User Manual 1178.3370.02 ─ 03
MMEMory:CLEar:STATe 1,<FileName>
This command deletes an instrument configuration file.
Parameters:
1
<FileName> String containing the path and name of the file to delete.
The string may or may not contain the file's extension.
Example:
MMEM:CLE:STAT 1,'TEST'
Usage: Event
MMEMory:LOAD:AUTO
1, 'Factory' | <FileName>
This command restores an instrument configuration and defines that configuration as
the default state.
The default state is restored after a preset (*RST) or after you turn on the
R&S FPL1000.
Parameters:
1
'Factory' |
<FileName>
'Factory'
Restores the factory settings as the default state.
'<file_name>
String containing the path and name of the configuration file.
Note that only instrument settings files can be selected for the
startup recall function; channel setup files cause an error.
Example:
MMEM:LOAD:AUTO 1,'C:
\Users\Public\Documents\Rohde-Schwarz\Analyzer\user\TEST'
Usage: Event
Manual operation: See " Startup Recall " on page 106
MMEMory:LOAD:STATe 1, <FileName>
This command restores and activates the instrument configuration stored in a *.dfl file.
Note that files with other formats cannot be loaded with this command.
The contents that are reloaded from the file are defined by the last selection made
either in the "Save/Recall" dialogs (manual operation) or through the
MMEMory:SELect[:ITEM] commands (remote operation; the settings are identical in
both cases).
By default, the selection is limited to the user settings ("User Settings" selection in the
dialogs, HWSettings in SCPI). The selection is not reset by PRESET or *RST.
Managing Settings and Results