User Manual

Remote Commands
R&S
®
FPL1000
798User Manual 1178.3370.02 ─ 03
<FileName> String containing the path and name of the target file.
The file extension is .dfl.
Example:
MMEM:STOR:STAT 1,'Save'
Saves the current instrument settings in the file Save.dfl.
Usage: Event
Manual operation: See " Save File " on page 105
See " Save " on page 153
MMEMory:STORe<n>:STATe:NEXT
This command saves the current instrument configuration in a *.dfl file.
The file name depends on the one you have set with MMEMory:STORe<n>:STATe.
This command adds a consecutive number to the file name.
Suffix:
<n>
.
irrelevant
Example:
MMEM:STOR:STAT 1,'Save'
Saves the current instrument settings in the file Save.dfl.
MMEM:STOR:STAT:NEXT
Saves the current instrument settings in the file Save_001.dfl
MMEM:STOR:STAT:NEXT
Saves the current instrument settings in the file Save_002.dfl
Usage: Event
Manual operation: See " Save File " on page 105
MMEMory:STORe<n>:TYPE <Mode>
This command defines whether the data from the entire instrument or only from the
current channel setup is stored with the subsequent MMEM:STOR... command.
Suffix:
<n>
.
irrelevant
Parameters:
<Mode> INSTrument | CHANnel
INSTrument
Stores data from the entire instrument.
CHANnel
Stores data from an individual channel setup.
*RST: INST
Example:
INST:SEL 'SPECTRUM2'
Selects channel setup 'SPECTRUM2'.
MMEM:STOR:TYPE CHAN
Specifies that channel setup data is to be stored.
Managing Settings and Results