User Manual

Remote Commands
R&S
®
FPL1000
800User Manual 1178.3370.02 ─ 03
HCOPy:PAGE:MARGin<device>:UNIT.............................................................................806
HCOPy:PAGE:ORIentation<device>................................................................................807
HCOPy:PAGE:WINDow<device>:CHANnel:STATe........................................................... 807
HCOPy:PAGE:WINDow<device>:COUNt......................................................................... 808
HCOPy:PAGE:WINDow<device>:SCALe......................................................................... 808
HCOPy:PAGE:WINDow<device>:STATe..........................................................................808
HCOPy:TDSTamp:STATe<device>................................................................................. 809
SYSTem:COMMunicate:PRINter:ENUMerate:FIRSt?........................................................ 809
SYSTem:COMMunicate:PRINter:ENUMerate[:NEXT]?...................................................... 810
SYSTem:COMMunicate:PRINter:SELect<device>.............................................................810
DISPlay:LOGO <State>
Activates/deactivates the printout of the Rohde & Schwarz company logo at the top of
each page.
Parameters:
<State> 1 | 0 | ON | OFF
1 | ON
Logo is printed.
0 | OFF
Logo is not printed.
*RST: 1
Example:
DISP:LOGO OFF
Manual operation: See " Print Logo " on page 113
HCOPy:ABORt
This command aborts a running hardcopy output.
Example:
HCOP:ABOR
Usage: Event
HCOPy:CONTent <ContType>
This command determines the type of content included in the printout.
Managing Settings and Results