User Manual

Remote Commands
R&S
®
FPL1000
804User Manual 1178.3370.02 ─ 03
Parameters:
<Format> GDI
Graphics Device Interface
Default format for output to a printer configured under Windows.
Must be selected for output to the printer interface.
Can be used for output to a file. The printer driver configured
under Windows is used to generate a printer-specific file format.
BMP, JPG, PNG
Data format for output to files only.
Example:
HCOP:DEV:LANG1 PNG
Manual operation: See " Destination " on page 116
HCOPy[:IMMediate<device>]
This command initiates a print job.
If you are printing to a file, the file name depends on MMEMory:NAME.
Suffix:
<device>
.
1 | 2
Irrelevant.
Usage: Event
Manual operation: See " Print " on page 115
HCOPy[:IMMediate<device>]:NEXT
This command initiates a print job.
If you are printing to a file, the file name depends on MMEMory:NAME. This command
adds a consecutive number to the file name.
Suffix:
<device>
.
1 | 2
Irrelevant.
Usage: Event
Manual operation: See " Print " on page 115
HCOPy:ITEM:WINDow:TEXT <Comment>
This command defines a comment to be added to the printout.
Parameters:
<Comment> String containing the comment.
Manual operation: See " Comment " on page 113
Managing Settings and Results