User Manual

Remote Commands
R&S
®
FPL1000
805User Manual 1178.3370.02 ─ 03
HCOPy:PAGE:COUNt:STATe <State>
This command includes or excludes the page number for printouts consisting of multi-
ple pages (HCOP:CONT WIND).
Parameters:
<State> 1 | 0 | ON | OFF
1 | ON
The page number is printed.
0 | OFF
The page number is not printed.
*RST: 1
Example:
HCOP:PAGE:COUN:STAT ON
Manual operation: See " Print Page Count " on page 113
HCOPy:PAGE:MARGin<device>:BOTTom
<Margin>
This command defines the margin at the bottom of the printout page on which no ele-
ments are printed. The margins are defined according to HCOPy:PAGE:
MARGin<device>:UNIT on page 806.
Suffix:
<device>
.
1 | 2
Irrelevant.
Parameters:
<Margin> numeric value
*RST: 4.23 mm
Example:
HCOP:PAGE:MARG2:BOTT 2
Manual operation: See " Margins " on page 119
HCOPy:PAGE:MARGin<device>:LEFT <Margin>
This command defines the margin at the left side of the printout page on which no ele-
ments are printed. The margins are defined according to HCOPy:PAGE:
MARGin<device>:UNIT on page 806.
Suffix:
<device>
.
1 | 2
Irrelevant.
Parameters:
<Margin> numeric value
*RST: 4.23 mm
Example:
HCOP:PAGE:MARG2:LEFT 2
Manual operation: See " Margins " on page 119
Managing Settings and Results