User Manual

Remote Commands
R&S
®
FPL1000
807User Manual 1178.3370.02 ─ 03
Example:
HCOP:PAGE:MARG2:BOTT 2
Manual operation: See " Margins " on page 119
HCOPy:PAGE:ORIentation<device> <Orientation>
The command selects the page orientation of the printout.
The command is only available if the output device is a printer or a PDF file.
Suffix:
<device>
.
1 | 2
Irrelevant.
Parameters:
<Orientation> LANDscape | PORTrait
*RST: PORTrait
Example:
HCOP:DEV:LANG1 PDF
HCOP:PAGE:ORI2 LAND
Manual operation: See " Orientation " on page 118
HCOPy:PAGE:WINDow<device>:CHANnel:STATe <ChannelName>, <State>
This command selects all windows of the specified channel setup to be included in the
printout for HCOP:CONT WIND.
Suffix:
<device>
.
1 | 2
Irrelevant.
Parameters:
<ChannelName> String containing the name of the channel setup.
For a list of available channel setup types use INSTrument:
LIST? on page 528.
<State> 1 | 0 | ON | OFF
1 | ON
The channel setup windows are included in the printout.
0 | OFF
The channel setup windows are not included in the printout.
*RST: 1
Example:
HCOP:CONT WIND
HCOP:PAGE:WIND2:CHAN 'IQ Analyzer',0
HCOP:PAGE:WIND2:STAT 'IQ Analyzer','1',1
Prints only window 1 in the IQ Analyzer channel setup.
Manual operation: See " Print Multiple Windows " on page 113
Managing Settings and Results