User Manual

Remote Commands
R&S
®
FPL1000
808User Manual 1178.3370.02 ─ 03
HCOPy:PAGE:WINDow<device>:COUNt <WinPerPage>
This command defines how many windows are displayed on a single page of the print-
out for HCOP:CONT WIND.
Suffix:
<device>
.
1 | 2
Irrelevant.
Parameters:
<WinPerPage> integer
*RST: 1
Example:
HCOP:PAGE:WIND2:COUN 2
Manual operation: See " Windows Per Page " on page 118
HCOPy:PAGE:WINDow<device>:SCALe <Mode>
This command determines the scaling of the windows in the printout for HCOP:CONT
WIND.
Suffix:
<device>
.
1 | 2
Irrelevant.
Parameters:
<Mode> 1 | 0 | ON | OFF
1 | ON
Each window is scaled to fit the page size optimally, not regard-
ing the aspect ratio of the original display. If more than one win-
dow is printed on one page (see HCOPy:PAGE:
WINDow<device>:COUNt on page 808), each window is prin-
ted in equal size.
("Size to fit")
0 | OFF
Each window is printed as large as possible while maintaining
the aspect ratio of the original display.
("Maintain aspect ratio")
*RST:
1
Example:
HCOP:PAGE:WIND2:SCAL 0
Manual operation: See " Scaling " on page 119
HCOPy:PAGE:WINDow<device>:STATe <ChannelName>, <WindowName>,<State>
This command selects the windows to be included in the printout for HCOP:CONT
WIND.
Managing Settings and Results