User Manual

Remote Commands
R&S
®
FPL1000
820User Manual 1178.3370.02 ─ 03
[SENSe:]CORRection:TRANsducer[:STATe].....................................................................822
[SENSe:]CORRection:TRANsducer:UNIT.........................................................................822
MMEMory:LOAD<n>:TFACtor.........................................................................................823
MMEMory:STORe<n>:TFACtor....................................................................................... 823
[SENSe:]CORRection:TRANsducer:ADJust:RLEVel[:STATe] <State>
This command turns an automatic adjustment of the reference level to the transducer
on and off.
Before you can use the command, you have to select and turn on a transducer.
Parameters:
<State> ON | OFF | 1 | 0
*RST: 0
Manual operation: See " Adjust Ref Level " on page 151
[SENSe:]CORRection:TRANsducer:CATalog?
This command queries all transducer factors stored on the R&S FPL1000.
After general data for the transducer storage directory, data for the individual files is lis-
ted.
The result is a comma-separated list of values with the following syntax:
<UsedMem>,<FreeMem>,<FileSize>,<FileName>[,<FileSize>,<FileName>]
Return values:
<UsedMem> numeric value in bytes
Amount of storage space required by all transducers files in the
C:\ProgramData\Rohde-Schwarz\ZNL-FPL\trd directory
(= sum of all individual <FileSize> values)
<FreeMem> numeric value in bytes
Amount of free storage space on the R&S FPL1000
<FileSize> numeric value in bytes
Size of a single transducer file
<FileName> string
Name of a single transducer file
Example:
SENSE:CORR:TRAN:CAT?
//Result: 2743,2312620544,720,'FactorGSM.TDF',2023,'FactorBTS.TDF'
Usage: Query only
[SENSe:]CORRection:TRANsducer:COMMent <Comment>
This command defines the comment for the selected transducer factor.
Configuring the R&S
FPL1000