User Manual

ManualsBrandsRohde & Schwarz ManualsSignal Generators & Spectrum AnalysersSpectrum Analyser Full Package, 3GHz, 50Ohm

831

832

833

834

835

836

837

838

839

840

Remote Commands

R&S

FPL1000

834User Manual 1178.3370.02 ─ 03

Manual operation: See "LAN Reset" on page 206

SYSTem:LXI:MDEScription <Description>

This command defines the LXI instrument description.

Parameters:

<Description> String containing the instrument description.

Manual operation: See "LXI Manufacturer Description" on page 206

SYSTem:LXI:PASSword <Password>

This command defines the LXI password.

Parameters:

<Password> String containing the password.

Return values:

<Password> The query returns the current password.

Manual operation: See "LXI Password" on page 206

SYSTem:REVision:FACTory

Resets the response to the REV? query for the revision number to the factory default.

8.10.7 Checking the System Configuration

The following commands are required to check the system configuration on the

R&S FPL1000.

Useful commands for obtaining system information described elsewhere:

●

DIAGnostic:SERVice:SINFo? on page 840

Remote commands exclusive to obtaining system information:

DIAGnostic:INFO:CCOunt?.............................................................................................835

DIAGnostic:SERVice:BIOSinfo?...................................................................................... 835

DIAGnostic:SERVice:HWINfo?........................................................................................835

DIAGnostic:SERVice:VERSinfo?..................................................................................... 836

SYSTem:ERRor:CLEar:ALL............................................................................................836

SYSTem:ERRor:CLEar:REMote......................................................................................836

SYSTem:ERRor:EXTended?...........................................................................................837

SYSTem:ERRor:LIST?................................................................................................... 837

SYSTem:ERRor[:NEXT]?................................................................................................838

SYSTem:FIRMware:UPDate........................................................................................... 838

SYSTem:FORMat:IDENt.................................................................................................838

SYSTem:PRESet:COMPatible.........................................................................................839

Configuring the R&S FPL1000