User Manual

Applications, Measurement Channels, and Result Displays

R&S

FPL1000

87User Manual 1178.3370.02 ─ 03

Example: Sequencer procedure

Assume the following active channel setup definition:

Tab name Application Sweep mode Sweep count

Spectrum Spectrum Cont. Sweep 5

Spectrum 2 Spectrum Single Sweep 6

Spectrum 3 Spectrum Cont. Sweep 2

IQ Analyzer IQ Analyzer Single Sweep 7

For Single Sequence, the following sweeps will be performed:

5x Spectrum, 6x Spectrum 2, 2 x Spectrum 3, 7x IQ Analyzer

For Continuous Sequence, the following sweeps will be performed:

5x Spectrum, 6x Spectrum 2, 2 x Spectrum 3, 7x IQ Analyzer,

...

For Channel-defined Sequence, the following sweeps will be performed:

5x Spectrum, 6x Spectrum 2, 2 x Spectrum 3, 7x IQ Analyzer,

5x Spectrum, 2 x Spectrum 3,

...

Running a Sequence of Measurements