Brochure

Key specifications
R&S
®
NGM201
R&S
®
NGM202
Number of channels
1
2
Max. output power
60 W
120 W
Output power per
channel
max. 60 W
Output voltage per
channel
0 V to 20 V
Output current per
channel
≤ 6 V: 6 A, > 6 V: 3 A
Load recovery time
< 30 µs
Max.
readback
resolution
1 µV/10
nA
Key features
R&S®NGM200 Power Supply Series
What sets these power supplies apart from others?
ı Fast regulation of output voltage with minimum
overshoot and very fast load recovery time
ı Minimum residual ripple and noise to supply
interference-free voltage to sensitive DUTs
ı Acquisition rate of up to 500 ksample/s to capture
extremely fast variations in voltage or current
ı High accuracy and readings with up to 6½ digit resolution
ı Two quadrants: operates as source or sink
ı Battery simulation
High-speed accuracy
R&S®NGM200
Fact Sheet
| 01.00
For more information, visit
www.rohde-schwarz.com/catalog/ngm200
▷
Power consumption
tests
Supplying sensitive
designs
Battery tests
Simulation of
voltage drops
The perfect choice for
Your benefit
Features
Minimal
overshoot from
abrupt
load
changes
ı
Optimized load recovery time < 30 µs
ı
Handles abrupt load changes from a few µA to
the ampere range without creating voltage
drops or overshoots
Supply
interference
-free
voltage to
sensitive designs
Low ripple and noise
values allow you to supply
interference
-free voltage to sensitive designs
such as complex semiconductors
and to support
the development of power amplifiers and MMICs
Capture fast
variations in
voltage/current
ı
Acquisition rate: up to 500 ksample/s
ı
Voltage and current results available every 2 µs
ı
On the R&S®NGM202, data acquisition on both
channels in parallel
Realistic
battery
simulation
ı
Simulate the actual battery output performance
ı
Testing can be based on a selected battery
model
ı
Battery capacity, SoC and Voc
can be set to any
state to test the device under specific
circumstances