Brochure

Rohde & Schwarz Probes and accessories for Rohde & Schwarz oscilloscopes 15
Accessories for high signal fidelity
All Rohde & Schwarz single-ended active probes come with
high-quality accessories. The R&S®RT-ZS60, for example,
includes signal and ground solder-in pins and probe tips.
Its design enables test point contacting with particularly
low input capacitance.
Extensive set of standard accessories for the
R&S®RT-ZS60 single-ended probe
Model Bandwidth Attenuation
factor
Input
impedance
Dynamic
range
Comment Order No.
Probes
R&S®RT-ZS10L 1 GHz 10:1 1 MΩ || 0.9 pF ±8 V BNC interface , 50 Ω output
1)
1333.0815.02
R&S®RT-ZS10E 1.0 GHz 10:1 1 MΩ || 0.8 pF ±8 V Rohde & Schwarz probe interface 1418.7007.02
R&S®RT-ZS10 1.0 GHz 10:1 1 MΩ || 0.8 pF ±8 V
(±12 V offset
compensation)
R&S®ProbeMeter and micro button for
instrument control, Rohde & Schwarz probe
interface
1410.4080.02
R&S®RT-ZS20 1.5GHz 10:1 1 MΩ || 0.8 pF 1410.3502.02
R&S®RT-ZS30 3.0 GHz 10:1 1 MΩ || 0.8 pF 1410.4309.02
R&S®RT-ZS60 6.0 GHz 10:1 1 MΩ || 0.3 pF ±8 V
(±10 V offset
compensation)
1418.7307.02
Accessories
R&S®RT-ZA2 accessory set for R&S®RT-ZS10/20E/20/30 1416.0405.02
R&S®RT-ZA3 pin set for R&S®RT-ZS10/10E/20/30 1416.0411.02
R&S®RT-ZA4 mini clips 1416.0428.02
R&S®RT-ZA5 micro clips 1416.0434.02
R&S®RT-ZA6 lead set 1416.0440.02
R&S®RT-ZA9 N(m) adapter for R&S®RT-Zxx oscilloscope
probes
1417.0909.02
1)
Requires 5:1 attenuation factor setting on oscilloscopes with 1MΩ input.
R&S®RT-ZA9 N(m) adapter for active broadband probes for
use with signal and spectrum analyzers
Offset –10 V
Exceptionally low offset and gain errors, minimal
temperature drift
Rohde & Schwarz single-ended active probes are char-
acterized by impressively low offset and gain errors. The
minimal gain drift coupled with the offset compensation
permits precise measurements – even over extended pe-
riods of time and at varying temperatures. Frequent com-
pensation during the measurement is no longer necessary,
simplifying everyday measurement tasks.
Probes_and_accessories_bro_en_3606-8866-12_v1400.indd 15 23.07.2019 13:47:50