Brochure

24
Very low-noise frontend for measuring sensor
signals
The extraordinarily high dynamic range and low-noise
design of the R&S®RT-ZVC probe enables clear measure-
ment of small sensor signals. Maximum sensitivity can
be achieved by using the current inputs in external shunt
mode which results in 18-bit resolution at 45 mV full-scale
differential input voltage. A cardiac voltage pulse with a
signal level of only 200 µV (peak-to-peak) can easily be
captured and analyzed.
Flexible connectivity options for every application
The R&S®RT-ZVC multi-channel power probe comes with
a set of high-quality pin connector cables and solder-in
leads to connect the probe in typical embedded electron-
ics measurement scenarios. 4 mm connector cables with
different lengths are optionally available as are BNC type
connector cables for connecting standard oscilloscope
voltage and current probes to extend the voltage and cur-
rent measurement range.
Small signals such as a 200 µV cardiac pulse can easily be measured.
Standard accessories include PCB connector cables for each channel and
solder-in leads.
4 mm cables with different lengths and BNC connector cables are
optionally available.
Probes_and_accessories_bro_en_3606-8866-12_v1400.indd 24 23.07.2019 13:48:04