Brochure

Rohde & Schwarz Probes and accessories for Rohde & Schwarz oscilloscopes 25
Model Input
channels
Bandwidth/
sampling
rate
Resolution Input
impedance
Full-scale input
range
Common
mode input
voltage
range
Order No.
R&S®RT-ZVC02 2 current,
2 voltage
1 MHz/
5 Msample/s
18 bit ❙ Voltage
channels:
10MΩ || 48 pF
❙ Current
channels:
1MΩ || shunt
resistor
❙ Voltage
■
±1.88 V
■
±3.75 V
■
±7.5 V
■
±15 V
❙ Current (internal
shunt)
■
10 kΩ: ±4.5 µA,
±45 µA,
■
10 Ω: ±4.5 m,
±45 mA,
■
10 mΩ: ±4.5 A,
±10 A
❙ Current (external
shunt, voltage range)
■
±45 mV, ±450 mV
(all channels)
±15 V 1326.0259.02
R&S®RT-ZVC04 4 current,
4 voltage
1326.0259.04
Accessory Comment Order No
R&S®RT-ZA30 Extended cable set for R&S®RT-ZVC, PCB probing, 1 current and 1 voltage lead, length: 32 cm 1333.1686.02
R&S®RT-ZA31 Extended cable set for R&S®RT-ZVC, 4 mm probing, 1 current and 1 voltage lead, length: 32 cm 1333.1692.02
R&S®RT-ZA33 Oscilloscope interface cable for R&S®RT-ZVC (included with R&S®RT-ZVC02/-ZVC04, 1326.0259.02/.04) 1333.1770.02
R&S®RT-ZA34 Extended cable set for R&S®RT-ZVC, 4 mm probing, 1 current and 1 voltage lead, length: 1 m 1333.1892.02
R&S®RT-ZA35 Extended cable set for R&S®RT-ZVC, PCB probing, 1 current and 1 voltage lead, length: 1 m 1333.1905.02
R&S®RT-ZA36 Solder-in cable set for R&S®RT-ZVC, 4 current and voltage solder-in cables, solder-in pins 1333.1911.02
R&S®RT-ZA37 Extended cable set for R&S®RT-ZVC, BNC connector, 1 current and 1 voltage lead, length: 16 cm 1337.9130.02
R&S®RTE-B1E Digital extension port for R&S®RT-ZVC usage with the R&S®RTE oscilloscope (included with R&S®RTE-B1) 1333.0750.02
R&S®RTO-B1E Digital extension port for R&S®RT-ZVC usage with the R&S®RTO oscilloscope (included with R&S®RTO-B1) 1333.0738.02
R&S®RTP-B1E Digital extension port for R&S®RT-ZVC usage with the R&S®RTP oscilloscope (included with R&S®RTP-B1) 1337.9581.02
Probes_and_accessories_bro_en_3606-8866-12_v1400.indd 25 23.07.2019 13:48:04