Brochure

The R&S®RT-ZH10 and R&S®RT-ZH11 passive high voltage probes provide
400MHz bandwidth and a spring-loaded 5mm tip.
The R&S®RT-ZH03 passive high voltage probe has a robust 5mm
probetip and is the perfect choice if 250MHz bandwidth is sufficient.
– +
8000
7000
6000
5000
4000
3000
2000
1000
0
0 400 1000
200 800600
28
Single-ended passive probes for voltages up to
1000V (RMS) and 6000V (peak)
If differential measurements are not required, single-ended
passive probes are a powerful, cost-effective solution.
The R&S®RT-ZH10 and R&S®RT-ZH11 passive high voltage
probes provide a bandwidth up to 400MHz and attenua-
tion factors of 100:1 and 1000:1, respectively.
Both probes are designed for RMS voltages up to 1000V
(CATII) and – when used exclusively for pulse measure-
ments – for peak voltages up to 6000V (CATI). Accesso-
ries include safety alligator clips, rigid and spring-loaded
tips and protection caps.
Maximum pulse peak voltage as a function of the
RMS voltage
Overview of measurement categories CAT 0 through CAT IV
The probe design determines its area of application and the maximum rated voltage against protective ground.
¸RT-ZH10 CAT I
AC voltage (RMS) or DC voltage in V
Maximum pulse peak voltage in V
CAT 0
Socket Main fusePower supply
CAT II CAT III CAT IV
Transformer
Probes_and_accessories_bro_en_3606-8866-12_v1400.indd 28 23.07.2019 13:48:12