Brochure

30
DC and AC measurements without circuit
interruption
The R&S®RT-ZC current probes precisely measure direct
and alternating current without interrupting the power cir-
cuit for the measurement. The extra-large opening on the
R&S®RT-ZC10 accommodates conductors of up to 20mm
in diameter. The R&S®RT-ZC10 can measure peak currents
up to 300A (500A for a single pulse). When measuring
low-amplitude, high-frequency currents, the more com-
pact R&S®RT-ZC20 with a measurement bandwidth of
100MHz is ideal.
Robust design and easy operation
Rohde & Schwarz current probes are characterized by their
robust design and easy operation. The degauss and offset
correction is performed directly at the probe connector.
The compact R&S®RT-ZA13 probe power supply supplies
up to four current probes. The current probes can be se-
lected as predefined probes on the R&S®RTO, R&S®RTE,
R&S®RTM and R&S®RTA oscilloscopes.
Current probes
Rohde & Schwarz current probes enable accurate,
non-intrusive measurement of DC and AC currents.
Different models are available to measure currents
in the range of 1mA to 2000A with a maximum
bandwidth of up to 120MHz.
R&S®RT-ZC20B current probe with Rohde & Schwarz probe interface (100 MHz, 30 A (RMS))
External power supply for up to four current probes
Probes_and_accessories_bro_en_3606-8866-12_v1400.indd 30 23.07.2019 13:48:15