User Manual

8. Specifications
RT-ZD002 RT-ZD003
Bandwidth DC to 25 MHz (-3 dB) DC to 25 MHz (-3 dB)
Attenuation Ratio 1:10 / 1:100 1:20 / 1:200
Accuracy ±2 % (meas.) ±2 % (meas.)
Rise Time 14 ns (calculated from bandwidth) 14 ns (calculated from bandwidth)
Input Impedance
8 M Ω // 2.75 pF differential
4 M Ω // 5.5 pF each side to ground
8 M Ω // 2.75 pF differential
4 M Ω // 5.5 pF each side to ground
Input Voltage
- Differential Range
1:10 ±70 V (DC+peak AC)
1:100 ±700 V (DC+peak AC)
1:20 ±140 V (DC+peak AC)
1:200 ±1400 V (DC+peak AC)
or 1000 Vrms
Input Voltage
- Common Mode Range
1:10 and 1:100
±700 V (DC+peak AC)
1:20 and 1:200
±1400 V (DC+peak AC)
or 1000 Vrms
Maximum Input Voltage
(each side to ground)
1000 V CAT III 1000 V CAT III
Output Voltage Swing
±7 V (into 50 k Ω load) ±7 V (into 50 k Ω load)
Output Voltage Offset ±5 mV (meas.) ±5 mV (meas.)
Output Voltage Noise 0.7 mVrms (meas.) 0.7 mVrms (meas.)
Oscilloscope Input
Impedance
1 MΩ 1 MΩ
CMRR (meas.) -86 dB @ 50 Hz, -66 dB @ 20 kHz -80 dB @ 50 Hz, -60 dB @ 20 kHz
Operating Temperature
-10 °C to 40 °C -10 °C to 40 °C
Storage Temperature
-30 °C to 70 °C -30 °C to 70 °C
Humidity 25 % to 85 % RH 25 % to 85 % RH
Power Requirements
- Standard
4 x AA Cells 4 x AA Cells
Power Requirements
- Optional
4.5 V to 12 V, 360 mW 4.5 V to 12 V, 360 mW
Length of BNC Cable
95 cm 95 cm
Length of Input Leads
45 cm 45 cm
Weight 400 g (probe and PVC jacket) 400 g (probe and PVC jacket)
Dimensions (LxWxH) 170 mm x 63 mm x 21 mm 170 mm x 63 mm x 21 mm