R&S®RT-ZD02 Differential Probe User Manual *5800039702* Version 01 User Manual Test & Measurement 1333082102
R T-Z D 0 2 D i f f e r e n t i a l P r o b e 10 : 1 R T- Z D 0 2 200 MHz bandwidth high input resistance of 1 MΩ low input capacitance of 3.5 pF high dynamic range of ±20 V differential and ±60 V common universal power supply using battery or USB cable typical applications: – differential signals like CAN Bus or LVDS – DC-DC converter General Information The RT-ZD02 200 MHz Differential probe is best suited for measurements of high-speed differential signals.
S p e c i f i c a t i o n s SPECIFICATIONS all data valid at 23 °C after 30 minutes warm up Electrical specifications Bandwidth (-3 dB): 200 MHz, typ. Attenuation Ratio: 10 : 1 Probe Risetime (10%-90%): 1.75 ns Gain Accuracy: ±1%, typ. Absolute Maximum Rated Input Voltage (each side to ground): ±60 V Maximum Differential Input Voltage (DC+AC Peak): ±20 V Maximum Common Mode Input Voltage ±60 V Input Resistance / Input capacity each side to ground: 500 kΩ, 7 pF between inputs: 1 MΩ, 3.
I m p o r t a n t h i n t s Important hints After unpacking please check for mechanical damage and loose parts floating around inside the instrument. In case of damage please inform the transport company immediately. Do not operate the instrument and protect it against unauthorized operation. Symbol: Please consult the manual Safety instructions The instrument conform to the European standards EN 61010-1 and IEC 61010-1, respectively.
U s i n g t h e p r o b e a n d a c c e s s o r i e s after parts relevant to safety have been replaced (visual inspection, PE conductor test, insulation resistance measurement, leakage current measurement, functional test). This helps to ensure the continued safety of the product. remove the battery. Note the WEEE label on the battery and dispose it properly. Cleaning the Probe Disconnect the probe and clean it with a soft cloth.
N o t e s 6 Subject to change without notice
N o t e s Subject to change without notice 7
© 2016 Rohde & Schwarz GmbH & Co. KG Mühldorfstr. 15, 81671 München, Germany Phone: +49 89 41 29 - 0 Fax: +49 89 41 29 12 164 E-mail: info@rohde-schwarz.com Internet: www.rohde-schwarz.com Customer Support: www.customersupport.rohde-schwarz.com Service: www.service.rohde-schwarz.com Subject to change – Data without tolerance limits is not binding. R&S® is a registered trademark of Rohde & Schwarz GmbH & Co. KG. Trade names are trademarks of the owners.
