User Manual

Maintenance and Service
R&S
®
RT-ZHD07/15/16/60
41User Manual 1800.2588.02 ─ 01
5 Maintenance and Service
5.1 Service Strategy
Like all Rohde & Schwarz devices, Rohde & Schwarz probes are of high quality and
require only minimum service and repair. However, if the probe needs to be serviced,
contact your Rohde & Schwarz service center. Return a defective probe to the Rohde
& Schwarz service center for diagnosis and exchange.
You can return the R&S RT-ZHD high voltage differential probe for calibration. The ser-
vice personnel will perform the required tests.
5.2 Returning the Probe for Servicing
Use the original packaging to return your Rohde & Schwarz probe to your
Rohde & Schwarz service center. A list of all service centers is available on:
www.services.rohde-schwarz.com.
If you cannot use the original packaging, consider the following:
1. Use a sufficiently sized box.
2. Protect the probe from damage and moisture (e.g. with bubble wrap).
3. Use some kind of protective material (e.g. crumpled newspaper) to stabilize the
probe inside the box.
4. Seal the box with tape.
5. Address the package to your nearest Rohde & Schwarz service center.
5.3 Cleaning
Device damage caused by cleaning agents
Cleaning agents contain substances that may damage the device; for example, solvent
may damage the labeling or plastic parts.
Never use cleaning agents such as solvents (thinners, acetone, etc.), acids, bases or
other substances
Cleaning