Brochure

Double insulation for maximum safety
Electrical
insulation
System
Interfaces
DC input
DC and/or
AC voltage
Channel
reference
CH 1
CH 2
CH 3
CH 4
USB, EthernetMSO logic probe
Electrical insulation
DC input
USB,
Ethernet
CH 1 CH 2 CH 3
System
Interfaces
MSO logic probe
CH 4
DC and/or AC voltage
Channel reference
– +
The probe design determines its area of application and the maximum rated voltage against protective ground.
Power supply Socket Main fuse Transformer
CAT II CAT IIICAT 0 CAT IV
10
Overview of measurement categories CAT 0 to CAT IV
Builtforyourwork
environment:
outstanding
protection and
ruggedness
❙ Isolation of all analog input channels
❙ RatedformeasurementsinCATIII1000V/
CATIV600Venvironments
❙ IP51housingforharshenvironments
❙ Nonslipandimpactresistantrubberizedsurface
Maximum safety in all environments
Troubleshooting in industrial environments presents many
challenges. Debugging electronic systems at a modern
production site can require analyzing low-voltage digital
signals, as well as verifying the power quality of a 380 V
supply, or testing the power efficiency of electrical drives.
The R&S®Scope Rider CAT IV 600 V rating provides this
level of flexibility in a single device.
Highest sensitivity and safe high-voltage
measurements at the same time
Double isolation of all input channels, the multimeter
channel
1)
and the digital interfaces, including the logic
channel (MSO), make it possible to measure in mixed
circuits with different ground levels. This reduces the
risk of accidental short circuits and enables safe mea-
surements in high-voltage electric installations. Sensitive
analog or digital control circuits can be measured without
compromising safety.
IP51 housing – tested in line with military
environmental standards
Thanks to the passive cooling concept, the handheld
oscilloscope feature a sealed IP51, dust and drip-proof
housing. Tested in line with military environmental stan-
dards, the R&S®Scope Rider provides the ruggedness
that is needed for harsh environments. A rubberized
surface with large keys makes it easy to use in difficult
environments.
1)
Separate multimeter channel only in two-channel models.
In the field
RTH_Scope_Rider_bro_en_3607-0517-62_v0603.indd 10 16.02.2017 10:58:41